How to Make Custom Umbrella Rigs for Fishing
Umbrella rigs are a popular fishing tool used to catch multiple fish at once. They consist of a central wire frame with multiple arms, each holding a lure. While you can buy ready-made rigs, making your own custom umbrella rigs can be a fun and rewarding experience. Here’s how to do it:
Materials Needed
To make a custom umbrella rig, you’ll need the following materials:
– A central wire frame
– Multiple wire arms
– Lures
– Swivels
– Split rings
– Pliers
– Wire cutters
Step 1: Assemble the Wire Frame
The first step in making an umbrella rig is to assemble the wire frame. The frame should be made of sturdy wire, such as stainless steel, and should be shaped like an umbrella. The arms should be evenly spaced around the frame and should extend outward at a 45-degree angle.
Step 2: Add the Wire Arms
Once the wire frame is assembled, it’s time to add the wire arms. The arms should be made of the same type of wire as the frame and should be bent into a J-shape. Attach each arm to the frame using a split ring and a swivel.
Step 3: Attach the Lures
Next, it’s time to attach the lures to the wire arms. You can use any type of lure that you prefer, but it’s important to choose lures that are similar in size and weight. This will help the rig to swim properly in the water.
Step 4: Test the Rig
Once the lures are attached, it’s time to test the rig. Hold the rig by the central wire frame and gently move it back and forth. The lures should move in a natural swimming motion.
Step 5: Make Adjustments
If the rig doesn’t swim properly, you may need to make some adjustments. Try adding or removing weight from the arms or adjusting the position of the lures. Keep testing the rig until you’re happy with the way it swims.
Step 6: Go Fishing!
Once your custom umbrella rig is complete, it’s time to take it out on the water and start fishing! Cast the rig out and let it sink to the desired depth. Then, retrieve the rig using a slow and steady motion.
Conclusion
Making your own custom umbrella rig can be a fun and rewarding experience. By following these simple steps, you can create a rig that is tailored to your specific fishing needs. So, gather your materials and get started today!
Umbrella rigs have become increasingly popular among anglers in recent years, as they can attract multiple fish at once. While you can buy pre-made umbrella rigs, making your own can be a fun and cost-effective way to customize your rig to your specific fishing needs. Here’s how to make your own custom umbrella rig for fishing:
Materials:
– Umbrella rig frame
– Wire cutters
– Fishing line
– Swivels
– Snap swivel
– Lure bodies
– Jig heads
– Crimping tool
– Pliers
Steps:
1. Start by selecting your umbrella rig frame. These frames typically have multiple arms and are made of metal. You can find them at most fishing supply stores or online.
2. Using wire cutters, trim the arms of the umbrella rig frame to your desired length. Keep in mind that shorter arms will create a tighter profile, while longer arms will create a wider spread.
3. Tie a length of fishing line to each arm of the umbrella rig frame, leaving enough slack to attach your lure bodies and jig heads.
4. Attach swivels to the end of each length of fishing line. These swivels will allow you to attach your snap swivel and main fishing line to the umbrella rig.
5. Attach a snap swivel to the center of the umbrella rig frame. This snap swivel will be used to attach your main fishing line to the rig.
6. Choose your lure bodies and jig heads. You can use any combination of lures that you prefer, but keep in mind that the overall weight of the rig should not exceed the maximum weight capacity of your fishing line and rod.
7. Attach the lure bodies and jig heads to the fishing line attached to each arm of the umbrella rig frame.
8. Use a crimping tool to secure the fishing line to each lure body and jig head.
9. Use pliers to adjust the position of each lure body and jig head on the fishing line. You can space them out evenly or create a pattern that you think will attract the most fish.
10. Attach your main fishing line to the snap swivel in the center of the umbrella rig frame.
11. Test your custom umbrella rig in the water to ensure that it swims properly and attracts fish.
By following these steps, you can create your own custom umbrella rig for fishing that is tailored to your specific needs and preferences. Remember to always follow local fishing regulations and guidelines when using your umbrella rig. Happy fishing!